Home
Appliances
UseAndCare
G
U
I
D
E
A Note to You ......................... 2
Washer Safety ........................ 3
Parts and Features ................ 4
Operating Your Washer ......... 5
Starting your washer .......... 5
Stopping/restarting
your washer ........................ 7
Selecting a cycle
and time.............................. 8
Using rinse and spin ........... 9
Using drain and spin........... 9
Understanding normal
washer sounds ................... 9
Understanding what
happens in each cycle ...... 10
MAGIC CLEAN® lint filter ... 11
Adding liquid
chlorine bleach ................. 11
Adding liquid
fabric softener................... 11
Caring for Your Washer ...... 12
Laundry Tips ........................ 13
Removing Stains.................. 17
Troubleshooting................... 20
Requesting Assistance
or Service ............................. 22
Warranty ............................... 24
1-800-253-1301
Call us with questions or comments.
ONE SPEED AUTOMATIC WASHERS
PART NO. 3363573
Washer Safety
This guide contains safety statements
under warning symbols. Please pay special
attention to these symbols and follow any
instructions given. Here is a brief explana-
tion of the symbol.
This symbol alerts you to
hazards such as fire,
electrical shock, or
other injuries.
Your safety is important to us.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – To reduce the risk of fire, electric shock, or injury to
persons when using the washer, follow basic precautions, including
the following:
•Read all instructions before using
•Do not allow children to play on
or in the washer. Close supervi-
sion of children is necessary
when the washer is used near
children.
•Before the washer is removed
from service or discarded, re-
move the door.
the washer.
•Do not wash articles that have
been previously cleaned in,
washed in, soaked in, or spotted
with gasoline, dry-cleaning
solvents, other flammable, or
explosive substances as they
give off vapors that could ignite
or explode.
•Do not reach into the washer if
the tub or agitator is moving.
•Do not add gasoline, dry-cleaning
solvents, or other flammable, or
explosive substances to the wash
water. These substances give
off vapors that could ignite or
explode.
•Under certain conditions, hydro-
gen gas may be produced in a
hot water system that has not
been used for 2 weeks or more.
HYDROGEN GAS IS EXPLO-
SIVE. If the hot water system has
not been used for such a period,
before using a washing machine,
turn on all hot water faucets and
let the water flow from each for
several minutes. This will release
any accumulated hydrogen gas.
As the gas is flammable, do not
smoke or use an open flame
during this time.
•Do not install or store the washer
where it will be exposed to the
weather.
•Do not tamper with controls.
•Do not repair or replace any part
of the washer or attempt any
servicing unless specifically
recommended in this Use and
Care Guide or in published
user-repair instructions that you
understand and have the skills to
carry out.
•See Installation Instructions for
grounding requirements.
– SAVE THESE INSTRUCTIONS –
3
Parts and Features
The parts and features of your washer are illustrated on this page. Become familiar with all
parts and features before using your washer.
NOTES:
• The drawings in this book may vary from your washer model. They are designed to
show the different features of all models covered by this book. Your model may not
include all features.
• Page references are included next to some features. Refer to those pages for more
information about the features.
Water temperature
selector
(p. 7)
Load size
selector
(p. 6)
Cycle control knob
Permanent
Press
NNoorrmmaall
LLiigghhtt
Spin
Off
Rinse
NNoorrmmaall
8
(pp. 7-9)
Heavy Duty
•
Large Capacity
s
6
Regular
Heavy
Warm
Cold
12
Warm
Warm
Rinse
Off
Large
old
ld
Medium
Small
7
Cycle
-
1
Speed
Spin
ff
Hot
Cold
Pull Start
Push Stop
tra
rge
4
O
Pre - Wash
8
20
Soak
Off
Short
Spin
Rinse
Soak
Wash
Rinse
Temperature
Load Size
Model and serial
number plate
(under lid)
(p. 2)
Basket
Tub
4
Operating Your Washer
To obtain the best washing results, you must operate your washer properly. This section
gives you this important information. Page references are included for more information.
wWARNING
wWARNING
Explosion Hazard
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Never place items in the washer that
are dampened with gasoline or other
flammable fluids.
Do not wash or dry items soiled with
vegetable or cooking oils because
they may contain some oil after
laundering.
Failure to follow these instructions
can result in death, fire, or electrical
shock.
Doing so can result in death,
explosion, or fire.
Starting your washer
1. Add measured detergent to the
washer. Then place a sorted load of
clothes in the washer.
• Sort and load clothes as described on
pages 13 and 14.
• If desired, you may also add color safe
bleach to the wash load.
2. Close the washer lid.
continued on next page
5
OPERATING YOUR WASHER
3. Turn the Load Size Selector to the
setting that corresponds with the size
of your wash load and the type of
fabric being washed.
Small
Large
• Depending on your model, your
washer’s Load Size Selector has two,
three, or four settings (see illustrations).
• To change the load size setting after
the washer has started to fill, turn the
Selector to the desired new setting.
Load Size
OR
Medium
Small
Large
Load Size
OR
Medium
Large
Extra
Large
Small
Load Size
6
OPERATING YOUR WASHER
4. Select a wash-rinse temperature with
the Water Temperature Selector. Match
the water temperatures with the type
of fabric and soils being washed.
Warm
Cold
Hot
Cold
Cold
Cold
• See page 15 for water temperature
guidelines.
• Depending on your model, your
washer’s Water Temperature Selector
has either three or four settings (see
illustrations).
Wash
Rinse
Temperature
• The top temperature is the wash water
and the bottom temperature is the
rinse water.
OR
Warm
Cold
Cold
Cold
Hot
Cold
Warm
Warm
Wash
Rinse
Temperature
5. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle you
want. See pages 8 and 9.
6. Pull out Cycle Control Knob to start
the washer.
7. (OPTIONAL STEP) If desired, add mea-
sured liquid chlorine bleach after the
washer starts agitating. See page 11.
8. (OPTIONAL STEP) If desired, add mea-
sured and diluted liquid fabric softener
to the final rinse cycle. See page 11.
Stopping/restarting your washer
• To stop the washer at any time, push in
the Cycle Control Knob.
• To restart the washer, close the lid (if open)
and pull out the Cycle Control Knob.
7
OPERATING YOUR WASHER
Selecting a cycle and time
This section illustrates and describes the
wash cycles you can select with the Cycle
Control Knob. Use this information to help
you make the best cycle selections for your
wash loads. Each cycle is designed for
different types of fabrics and soil levels.
• The washer pauses briefly throughout each
cycle. These pauses are normal for washer
operation.
• Refer to page 9 to learn more about the
sounds you may hear during a wash cycle.
• Refer to page 10 to help you understand
what happens during a wash cycle.
Normal Cycle
Soak Cycle
The Normal cycle features longer spins to
shorten drying time.
The Soak cycle features brief periods of agi-
tation and soak time
to help remove heavy
Spin
Off
Normal
Use this cycle for
Rinse
cleaning cotton and
linen fabrics. Select 6
(Regular) or 12
(Heavy) minutes of
wash time, depending
on whether your load
soils and stains that
Regular
Off
6
need pretreatment.
• Use warm water
when soaking
laundry. Hot water
can set stains. See
Heavy
12
Soak
20
is moderately or heavily soiled.
pages 17-19 for stain removal information.
•
Use the amount of detergent or presoak
additive recommended by the manufacturer.
Permanent Press Cycle
The Permanent Press cycle features a
cool-down rinse and
• After the Soak cycle ends, add detergent
and set a new wash cycle.
Regular
Permanent
Light Press
shorter spins to
8
4
reduce wrinkling. Use
this cycle for cleaning
permanent press and
some synthetic fabrics.
Pre-Wash Cycle
The 4-minute Pre-Wash cycle features a
Pause
Cool
Down
Rinse
brief period of agi-
tation to help remove
heavy soils and
stains that need
pretreatment. See
pages 17-19 for
stain removal infor-
mation. Once the
Spin
Off
Select 4 (Light) or 8
Off
(Regular) minutes of
wash time, depending on whether your wash
load is lightly or moderately soiled.
4
Pre-Wash
20
Short Cycle
The Short cycle features brief wash and
soak periods, followed
Pre-Wash cycle ends, add detergent and
start a new wash cycle.
by shorter spins. Use
this 8-minute cycle to
clean delicate items
and washable knits
8
Soak
that are lightly or
moderately soiled.
Rinse
Short
Off Spin
8
OPERATING YOUR WASHER
Using rinse and spin
When using extra detergent for heavily soiled
clothes, or washing special-care items, you
may find an extra rinse and spin is needed.
Permanent
Off
Normal
Rinse
Press
1. For an additional rinse, push in the Cycle
Control Knob and turn clockwise to Rinse,
as illustrated.
2. Pull out the Cycle Control Knob. The
washer fills to selected load size,
agitates, drains, and spins.
Rinse
Off
Off
Pre-Wash
Rinse
Soak
Short
Off
Using drain and spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
Permanent
Spin
Off
Normal
Press
1. Push in the Cycle Control Knob and turn
clockwise to Spin, as illustrated.
2. Pull out the Cycle Control Knob. The
Off
Spin
Off
washer drains, then spins.
Pre-Wash
Soak
Short
Off Spin
Understanding normal washer sounds
Your new washer may make sounds that
your old one didn’t. Because the sounds are
unfamiliar, you may be concerned about
them. Don’t be; most of them are normal.
The following describes some of the sounds
you may hear and what causes them.
During drain
The rate that water is drained from your
washer depends on your installation. If water
is drained quickly from the washer, you may
hear air being pulled through the pump. This
happens during the end of draining.
During washing
After drain and before spin
When the cycle changes from draining to
spinning, you may hear gears engaging.
When you select a small load size setting
for a small wash load, the water level in your
washer is lower. With this lower water level,
you may hear a clicking sound from the
upper portion of the agitator.
9
OPERATING YOUR WASHER
Understanding what happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to
the selected load size) before agitation and
timing start. The washer begins agitating
immediately after filling; agitation occurs with
the washer lid up or down.
After agitation starts, the Cycle Control Knob
turns clockwise until it points to an OFF area
and the cycle ends.
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
During agitation, the agitator creates a
continuous rollover action
that provides a thorough
cleaning of the wash load.
WASH
RINSE
Fill
▼
Fill
▼
Wash selected time
▼
Rinse
▼
Drain*
No agitation
▼
Drain-No agitation
▼
*The Permanent Press cycle partially
drains, fills, agitates briefly, and drains.
Spin-Spray rinse
▼
Spin
▼
Spin
▼
Off
10
OPERATING YOUR WASHER
®
MAGIC CLEAN lint filter
The lint filter at the bottom of the washer
basket cleans itself. During agitation, wash
and rinse water passes over the filter,
separating the lint from the water. The lint is
then spun away from the filter and out of the
system during the spin part of the cycle.
If your washer drains into a tub, remove
Basket
interior
MAGIC CLEAN
lint filter
any lint collected in the tub or strainer.
Adding liquid chlorine bleach
Always measure liquid chlorine bleach. Do
not guess. Never use more than 1 cup
(250 mL) for a full load. Follow manu-
facturer’s directions for safe use. Use a cup
with a pouring spout to avoid spilling.
NOTE: Undiluted bleach will damage any
fabric it touches. The damage appears as
rips, holes, tears, or color loss and may not
show up until several washings later.
1. Let the washer fill and begin agitating
the load.
2. Add bleach to wash cycle so it can be
removed in the rinse cycle. Pour bleach
around agitator, not directly on load.
• Follow directions on care labels. Do not
use chlorine bleach on wool, silk,
spandex, acetates, or some flame-
retardant fabrics.
• When soaking with chlorine bleach, add
detergent to soak water.
Adding liquid fabric softener
• Always dilute fabric softener with 1⁄2 to
1 cup (125 to 250 mL) warm water.
Undiluted fabric softener can stain fabrics.
• Add diluted fabric softener only in the
final rinse.
• Fabric softener should not be mixed with
other laundry products because greasy
stains may form. If stains form, remove
them by wetting the stain and rubbing with
liquid detergent or a bar of soap. Rewash
the stained item.
• Too much fabric softener can make some
items (diapers and towels) nonabsorbent.
If this happens, use less fabric softener or
do not use it every time.
11
Caring for Your Washer
Proper care of your washer can extend its life. This section explains how to care for your
washer properly and safely.
Cleaning your washer
Exterior
Interior
Wipe up detergent, bleach, and other spills
with a soft, damp cloth or
sponge as they occur. Occa-
sionally wipe the outside of
the washer to keep it looking
like new.
Clean interior with 1 cup (250 mL) of chlo-
rine bleach mixed with 2 cups (500 mL) of
detergent. Run washer through a complete
cycle using hot water. Repeat process if
necessary.
NOTE: Remove hard water deposits using
Do not put sharp or metal objects in your
washer. They can damage the
finish. Check all pockets for
pins, clips, money, bolts, nuts,
etc. Do not lay these objects
on your washer after emptying
pockets.
only cleaners labeled as washer safe.
Winter storage or moving care
Install and store your washer where it will not freeze. Because some water may stay in the
hoses, freezing can damage your washer. If storing or moving your washer during freezing
weather, winterize it.
To winterize washer:
To use washer again:
1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. Put 1 quart (1L) of R.V.-type antifreeze in
1. Flush water pipes and hoses.
2. Reconnect water inlet hoses.
3. Turn on both water faucets.
4. Reconnect power supply cord.
the basket.
4. Run washer on a drain and spin setting
(see page 9) for about 30 seconds to mix
the antifreeze and water.
5. Run the washer through a complete cycle
with 1 cup (250 mL) of detergent to clean
out antifreeze.
5. Unplug the power supply cord.
Non-use or vacation care
Operate your washer only when you are at
home. If you will be on vacation or not using
your washer for an extended period of time,
you should:
• Turn off the water supply to the washer.
This helps avoid accidental flooding
(due to a water pressure surge) while
you are away.
• Unplug the power supply cord or turn off
electrical power to the washer.
12
Laundry Tips
This section reviews proper laundering techniques and gives you additional washing
information.
Preparing clothes for washing
• Close zippers, snaps, and hooks to avoid
snagging other items. Remove
pins, buckles, and other hard
• Tie strings and sashes so they will not
tangle.
• Mend tears, loose hems, and seams.
• Treat spots and stains. (See “Removing
Stains” on pages 17-19.)
• Stained or wet garments should be
washed promptly for best results.
objects to avoid scratching the
washer interior. Remove non-
washable trim and ornaments.
• Empty pockets and turn them inside out.
• Turn down cuffs, brush away lint and dirt.
• Turn synthetic knits inside out to avoid pilling.
Sorting
• Separate heavily soiled items from lightly
soiled ones, even if they would
normally be washed together.
Separate lint givers (towels,
chenille) from lint takers
• Separate dark colors from light colors,
colorfast items from noncolorfast items.
• Sort by fabric and construction (sturdy
cottons, knits, delicate items).
(corduroy, synthetics, perma-
nent press). When possible, turn lint givers
inside out.
Loading
• Drop items into washer loosely. Fill to the
top of the basket (top row of
holes). Do not wrap items
• Load by the amount of space items take
up, not by their weight.
• Mix large and small items in each load.
Load evenly to maintain
around the agitator. Items
should move easily through
wash water for best cleaning
and wrinkle-free results. Items should sink
and reappear later.
washer balance. An off-
balance load can make the
washer vibrate during spin.
• Load washer properly and select correct
load size setting. Overloading or packing
the machine, and selecting a setting too
small for the wash load can:
• Use a large load size setting to reduce
wrinkling with permanent press clothes and
some synthetic knits. These items should
have more room to move in the water than
heavy items (towels, jeans).
– cause poor cleaning.
– increase wrinkling.
– create excessive lint.
– wear out items faster (because of pilling).
• Reduce wash time when using a small
load size setting. Loads with only a few
small items need less wash time.
13
LAUNDRY TIPS
Loading suggestions
For these suggested full-sized loads, set the Load Size Selector to the highest load size
setting.
LARGE CAPACITY WASHERS
Heavy Work
Clothes
2 pair pants
3 shirts
3 pair jeans
1 coverall
Permanent Press
Mixed Load
Towels
1 double sheet
1 tablecloth
1 dress
1 blouse
2 slacks
2 double or
1 king size sheet(s)
4 pillowcases
6 T-shirts
6 pair shorts
2 shirts
8 bath towels
8 hand towels
10 wash cloths
1 bath mat
Delicates
2 camisoles
4 slips
4 panties
2 bras
3 shirts
2 pillowcases
Knits
2 blouses
6 handkerchiefs
2 slacks
2 blouses
4 shirts
4 tops
2 nighties
2 dresses
SUPER CAPACITY WASHERS
Heavy Work
Clothes
3 pair pants
3 shirts
4 pair jeans
1 coverall
1 overall
Permanent Press
Mixed Load
Towels
2 double or
1 king size sheet(s)
1 tablecloth
1 dress
1 blouse
2 slacks
3 double sheets
4 pillowcases
8 T-shirts
6 pair shorts
2 shirts
10 bath towels
10 hand towels
14 wash cloths
1 bath mat
Delicates
2 blouses
8 handkerchiefs
3 camisoles
1 quilted robe
4 slips
4 panties
2 bras
3 shirts
2 pillowcases
Knits
3 slacks
3 blouses
6 shirts
4 tops
2 nighties
1 baby’s dress
4 dresses
Saving energy
• Avoid rewashing. Use enough detergent
and pretreat stains or heavy soils. Use the
cycles and wash times recommended for
the fabric and soil.
• Use your washer during off-peak hours –
usually early morning and late evening.
(Ask your power company.)
• Use warm or cold wash water for most
loads. Use hot water only when washing
heavy, greasy soils or whites.
• On some models, use only cold rinses.
• Wash full loads.
• Use lower water levels when washing
small loads.
14
LAUNDRY TIPS
Water guidelines
Selecting water temperatures
WASH WATER
TEMPERATURE*
SUGGESTED FABRICS
COMMENTS
• Work clothes
• Sturdy whites/colorfast
pastels
HOT
130°F (54°C)
or above
• Best cleaning for heavily soiled items
• Removes oils, perspiration, greasy
soils, and stains
• Diapers
• Prevents graying or yellowing
WARM
90-110°F
(32-44°C)
• Dark/noncolorfast colors
• Permanent press items
• Nylon, polyester, acrylics,
silks, woolens
• Best for moderately soiled to lightly
soiled items
• Safe for most fabric finishes
• Less fading and dye bleeding
• Reduces wrinkling
• Knits/delicate fabrics
• Extra-sensitive colors
• Noncolorfast items
• Hand washables
COLD
70-90°F
(21-32°C)
• Best for very lightly soiled items
• Saves hot water
• Best rinse water temperature
* The washer features cold rinses for all wash temperatures. In addition, on some models,
warm rinses are available with warm washes. Warm rinse water provides better water
extraction than cold rinse water and shortens drying times. However, warm rinse water may
increase wrinkling when line drying. In cold climates, warm rinse water also provides a more
comfortable temperature for handling the wash load.
Checking hot water
temperature
Your hot water should be 130°F (54°C) or
above. If you do not know your hot water
temperature, you can check it easily. You
may need to raise the temperature of your
water heater. To check your hot water:
Water hardness
Many poor washing results can be traced to
the hardness of the wash water. To check
your water hardness:
• City water – ask the city water company.
• Well water – ask the local water authority.
Ask for the mineral content in grains/gallon
or parts/million. If your water is more than
8 grains/gallon or more than 137 parts/
million, you should consider:
• Installing a water softener.
• Using more detergent.
• Using a packaged water conditioner.
• Not using soap.
1. Fill a pan with the hottest water available
from the faucet that fills your washer.
NOTE: If you do not have a faucet at your
washer site, collect the water from the
faucet closest to your washer.
2. Place a candy thermometer or cooking
thermometer in the water to check the
temperature.
NOTE: In wash water temperatures colder
than 70°F (21°C), detergents do not dissolve
well. Also, soils may be difficult to remove,
and some fabrics may retain wear wrinkles
and may have increased pilling.
15
LAUNDRY TIPS
Washing special-care items
Most garments and household textiles have care labels with laundering instructions. Always
follow care label directions when they are available. Below are general washing instruc-
tions for some special washables.
CARE INSTRUCTIONS
ITEM
Pretreat spots and stains. Select water temperature, cycle, and
time according to the type of blanket being washed. Two rinses
may be necessary. Check care label to see if manufacturer
recommends machine washing.
Blankets
(electric or woolen)
Wash small loads. Crowding may cause wrinkling. Replace
slipcovers while still slightly damp. They will dry to fit tightly.
Curtains, drapes,
slipcovers
NOTE: Sun-damaged curtains and draperies will tear whether
hand or machine washed.
Diapers
When using chlorine bleach for soaking, add extra detergent to
the load. Avoid overuse of fabric softeners – absorbency will be
reduced.
Elastic, spandex
Elastic picks up oil from the body. Oil can damage elastic. Wash
often to reduce the damage. Use warm water and sufficient
detergent to remove oils. Do not use chlorine bleach.
Flame-retardant
clothing
Items will be clearly labeled as flame-retardant. Follow
manufacturer’s instructions to retain flame-retardant qualities.
Knits
Knits are comfortable to wear because they stretch. However,
this means that knits are more likely to be stretched and dam-
aged when washed (especially bulky knits). Knits made of
synthetic fabrics such as polyester, nylon, and acrylic tend to
keep their original shape more than knits made of cotton
or ramie.
Pillows, stuffed
toys
Washing feather pillows is not recommended unless they will be
dried in a dryer.
Plastic, rubber
items
Treat as delicate items. Wash in warm water. Wash small items
in a mesh bag.
Quilts, bedspreads
Do not wash cotton-filled comforters unless they are quilted or
stitched. Tucked cotton batting tends to slip and become lumpy.
An extra rinse may be necessary.
Scatter rugs
Shake or vacuum rugs to remove loose dirt. Wash more than one
rug at a time. If washing only one rug, add bath towels to balance
the load.
Snowsuits, jackets
Wash only one or two items at a time. You may need to stop the
washer occasionally to press air from the items being washed. An
extra rinse may be necessary.
16
Removing Stains
Stained, heavily soiled, or greasy items may need to be prewashed or soaked for best
results. Soaking helps remove protein-type stains like blood, milk, or grass. Prewashing helps
loosen soil before washing.
Stain removal rules
• Use warm water for soaking or prewashing
• When bleach is recommended, use a
bleach that is safe for the fabric.
stained laundry. Hot water can set stains.
• Most stains are easier to remove when
they are fresh. Old or set stains may not
come out. Follow package directions for
pretreatment products.
• Before treating any stain, find out what
kind of stain it is, how old the stain is, what
kind of fabric it is, and if the fabric is
colorfast. (Check the care label.)
• Test stain removers on an inside seam or
hidden corner of the item to see if the color
is removed.
• Put the stained area face down on a paper
towel or white cloth. Apply the stain
remover to the back of the stain. This
forces the stain off the fabric instead of
through it.
• Washing and drying can set some stains.
• Start with cold or warm water. Hot water
can set some stains.
• Meat tenderizer or enzyme presoaks help
break down some protein stains so they
are easier to remove.
Stain removal guide
STAIN
TO REMOVE
Alcoholic
beverage
These stains turn brown with age, so treat immediately. Sponge or soak
fresh stains with cold water. Wash. If stain remains, soak 15 minutes in a
solution of lukewarm water, liquid detergent, and a few drops of white
vinegar. Rinse. Wash.
Blood
Rinse immediately or soak in cold water with enzyme presoak for 30
minutes or longer. Rinse. Rub detergent into any remaining stains. Rinse.
If stain remains, put a few drops of 3% hydrogen peroxide on stain for 3-5
minutes. Rinse thoroughly. Wash.
Chewing
gum
Use ice to make gum hard. Scrape off what you can. Sponge with a
nonflammable fabric cleaner. Let dry. Wash.
Chocolate
or coffee
Sponge immediately with a nonflammable fabric cleaner or apply a prewash
soil and stain remover. Rinse. Wash. If stain remains, apply a liquid deter-
gent to stain or soak in warm water with an enzyme presoak. Rewash.
Crayon and Scrape off excess with a dull knife. Place fabric between two blotters or
candle wax facial tissue. Press with warm iron. Remove color stain with nonflammable
fabric cleaner. Hand wash until stain is gone. If full load is crayon stained,
take to cleaners or coin-operated dry cleaning machine.
Cream,
milk, or
ice cream
Sponge with a nonflammable fabric cleaner, or a prewash soil and stain
remover. Rinse. Wash. Repeat if necessary. If stain remains, apply a few
drops of liquid detergent and a few drops of ammonia. Blot dry and rinse.
If stain remains, soak in an enzyme presoak. Wash.
continued on next page
17
REMOVING STAINS
TO REMOVE
STAIN
Light stain: Treat with liquid detergent or your regular laundry detergent.
Wash in hottest water safe for fabric.
Deodorants
and anti-
perspirants
Heavy stain: Place face down on towel and treat with a paste of ammo-
nia and color safe bleach. Let stand for 30 minutes. Wash in hottest water
safe for fabric.
wWARNING
Fire Hazard
Do not wash or dry items soiled with vegetable or cooking oils
because they may contain some oil after laundering.
Doing so can result in death or fire.
Fat, grease, Items soiled with vegetable or cooking oil should not be washed or dried.
or oil
For other types of greasy stains, use one of the methods below:
• Use pretreatment stain remover. Follow label directions. Wash in hottest
water safe for fabric.
• Use talcum powder to absorb as much grease as possible. Sponge with
a nonflammable fabric cleaner. Rinse. Wash.
• Treat with liquid detergent or rub a detergent paste on the stain. Wash
using hottest water safe for fabric.
Fruit stains Fresh stains: Soak immediately in cool water. Wash. If stain remains,
cover area with a paste made of color safe bleach, a few drops of hot
water, and a few drops of ammonia. Wait 15 to 30 minutes. Wash.
Old stains: Sponge with white vinegar. Rinse. Repeat procedure for
fresh stains.
Grass or
green
vegetables
Soak in warm or cold water with an enzyme presoak for at least 30 min-
utes, or sponge with denatured alcohol. Wash in water temperature and
bleach safe for the fabric. For colored fabrics, check colorfastness before
applying alcohol. For acetate, sponge with a nonflammable fabric cleaner.
If stain remains, bleach with 3% hydrogen peroxide. Rinse. Rewash.
Ink or
ballpoint
pen ink
Spray stain with an aerosol hair spray or rubbing alcohol. Sponge stain
continuously until all bleeding stops. Let dry. Repeat if necessary. Wash.
If stain remains, bleach if safe for fabric. (India and other indelible inks are
almost impossible to remove completely.)
Iron or rust
Colored or noncolorfast items: Apply lemon juice and salt. Place in the
sun to dry. Rinse thoroughly. Repeat if necessary.
White or colorfast items: Try a rust remover. Test first on inside seam or
hem. Some rust removers are not washer safe. Follow package directions.
18
REMOVING STAINS
STAIN
TO REMOVE
Ketchup
or tomato
products
Sponge immediately with a nonflammable fabric cleaner or apply a
prewash soil and stain remover. Rinse. Wash. If stain remains, apply a
liquid detergent to stain or soak in warm water with an enzyme presoak.
Rewash.
Lipstick
Apply nonflammable fabric cleaner or prewash soil and stain remover.
Blot with absorbent material. Repeat if necessary. Rinse. If stain still
remains, rub with liquid detergent. Wash.
Meat juice,
egg
Scrape off excess with a dull knife. Soak in cold or warm water with
enzyme presoak at least 30 minutes, or treat stains with a nonflammable
fabric cleaner. Wash.
Mildew
Wash in hottest water safe for fabric. If stain remains, soak in warm water
and a color safe bleach for 15 to 30 minutes. Rewash. (Old mildew stains
are almost impossible to remove. Mildew fungus destroys or weakens
fabrics.) An alternative to bleach is to treat with salt and lemon juice and
dry in direct sunlight. Rinse and rewash. Mildew may form if wet or damp
laundry remains in your washer for extended periods of time. To prevent
mildew, promptly dry laundry after washing.
Mustard
Paint
Treat immediately. Scrape off excess mustard. Sponge with a nonflam-
mable fabric cleaner or a prewash soil and stain remover. Rinse. Work
liquid detergent and a few drops of vinegar into stain. Rinse. If stain
remains, apply 3% hydrogen peroxide. Rinse and wash.
Hand wash paint-stained items.
Water base: Treat stains while still wet. (These paints cannot be removed
after they have dried.) Rinse in warm water to flush out paint. Sponge with
a nonflammable fabric cleaner. Rinse. Wash.
Oil base: Scrape off fresh paint. Sponge with a nonflammable fabric
cleaner. While stain is still wet with solvent, rub liquid detergent into it.
Wash with hottest water safe for fabric.
Perspiration
Remove stains before ironing. Perspiration stains may weaken fabric.
Wash or sponge stain thoroughly with detergent and warm water. If
perspiration has changed the color of the fabric, use one of the following
treatments:
Fresh stains: Apply ammonia to stain. Rinse. Launder to remove
ammonia odor.
Old stains: Apply white vinegar to stain. Rinse. Launder to remove
vinegar odor.
Scorch
Severe scorch cannot be removed. Wet stain with 3% hydrogen peroxide.
Cover with a dry cloth and press with an iron as hot as is safe for fabric.
Rinse well. Wash.
OR
Wet with lemon juice and spread in the sun to dry. Wash.
Soft drinks
Sponge immediately with cold water and alcohol. Heat and detergent may
set stain.
19
Troubleshooting
Most laundering problems are easily solved if you understand the cause. Check the following
list for common laundry problems and the next page for common washer problems. If you
need further assistance, see page 22.
Common laundry problems
PROBLEM
CAUSE
Brown, yellow
stains
• Chlorine staining
• Iron in water heater or pipes; iron and manganese in water
Dye transfer
• Improper sorting
• Load not immediately removed from washer after end of cycle
Gray whites,
dingy colors
• Improper sorting
• Water temperature too low
• Not enough detergent
• Using soap in very hard water (use detergent in hard water)
Greasy looking
spots
• Fabric softener poured directly on clothes
• Not enough detergent
Lint
• Improper sorting
• Paper or tissue in pockets
• Pilling being mistaken for lint
• Not enough detergent
Load too wet
after spin
• Cold rinses
• Cycle stopped before spinning is complete
Shrinking
• Fabric type (some knits stretch during manufacturing –
laundering returns fabric to original size)
• Care label directions not followed
Snags, rips,
and holes
• Items damaged before washing
• Misuse of chlorine bleach (do not pour directly on clothes)
• Sharp items not removed from pockets; fasteners not fastened
Stiff, rough
fabrics
• Using soap in very hard water (use detergent in hard water)
• Not enough detergent
• Line drying
• Overloading
• Clothes wrapped around agitator
Twisting/
Tangling
• Overloading (leave more room for permanent press and knits)
• Load not immediately removed from washer after cycle
• Warm rinse water
Wrinkling
• Cycle selection incorrect
Yellow areas
(from body oils)
• Water temperature too low
• Not enough detergent
20
TROUBLESHOOTING
Common washer problems
Before calling for service, check these:
Is the lid closed?
▼
Is the Cycle Control Knob set and pulled out?
▼
Is the power cord firmly plugged into a live outlet with proper voltage?
▼
Have you blown a household fuse or tripped a circuit breaker?
▼
Are both the hot and cold water faucets turned on?
▼
Are the water hoses kinked or clogged?
▼
Is the drain hose higher than the water level in the washer? It must be higher for
proper operation.
▼
Is the washer making noises (see page 9), or vibrating?
Is the wash load properly distributed around the agitator?
NOTE: Washer stops briefly during a wash cycle. These pauses are normal.
If none of these items was causing your problem, see “Requesting Assistance or Service” on
page 22.
21
Requesting Assistance
or Service
Before calling for assistance or service, please check “Troubleshooting” on pages 20-21. It
may save you the cost of a service call. If you still need help, follow the instructions below.
1. If you need assistance* …
3. If you need FSP®
replacement parts …
Call the Whirlpool Consumer Assistance
Center telephone number.
Dial toll-free from anywhere
in the U.S.A.:
FSP is a registered trademark of Whirlpool
Corporation for quality parts. Look for this
symbol of quality whenever you need a
replacement part for your WHIRLPOOL®
appliance. FSP replacement parts will fit
right and work right, because they are made
to the same exacting specifications used to
build every new WHIRLPOOL appliance.
To locate FSP replacement parts in your
area, refer to Step 2 or call the Whirlpool
Consumer Assistance Center number in
Step 1.
1-800-253-1301
and talk with one of our trained
consultants. The consultant can instruct you
in how to obtain satisfactory operation from
your appliance or, if service is necessary,
recommend a qualified service company in
your area.
If you prefer, write to:
Whirlpool Brand Home Appliances
Consumer Assistance Center
c/o Correspondence Dept.
2000 North M-63
4. If you are not satisfied
with how the problem
was solved …
• Contact the Major Appliance Consumer
Action Program (MACAP). MACAP is a
group of independent consumer experts
that voices consumer views at the highest
levels of the major appliance industry.
Benton Harbor, MI 49022-2692
Please include a daytime phone number in
your correspondence.
2. If you need service* …
• Contact MACAP only when the dealer,
authorized servicer, and Whirlpool have
failed to resolve your problem.
Whirlpool has a nationwide network of
authorized Whirlpool service
companies. Whirlpool service
technicians are trained to fulfill
the product warranty and
Major Appliance Consumer Action Program
20 North Wacker Drive
provide after-warranty service,
anywhere in the United States. To locate the
authorized Whirlpool service company in
your area, call our Consumer Assistance
Center telephone number (see Step 1) or
look in your telephone directory Yellow
Pages under:
Chicago, IL 60606
• MACAP will in turn inform us of your
action.
Gearcase assembly
covered by your
warranty
•APPLIANCE-HOUSEHOLD-
MAJOR, SERVICE & REPAIR
• WASHING MACHINES &
DRYERS, SERVICE & REPAIR
- See: Whirlpool Appliances or
Authorized Whirlpool Service
(Example: XYZ Service Co.)
- See: Whirlpool Appliances or
Authorized Whirlpool Service
(Example: XYZ Service Co.)
* When asking for help or service:
Please provide a detailed description of the problem, your appliance’s complete model
and serial numbers, and the purchase date. (See page 2.) This information will help us
respond properly to your request.
22
NOTES
23
®
WHIRLPOOL
Automatic Washer Warranty
LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR
FSP® replacement parts and repair labor to correct defects in
materials or workmanship. Service must be provided by an
authorized Whirlpool service company.
FULL ONE-YEAR
WARRANTY
FROM DATE OF
PURCHASE
FSP replacement parts for any part of gearcase assembly if
defective in materials or workmanship. The gearcase assembly
is shown in the “Requesting Assistance or Service” section of
this book.
LIMITED FIVE-YEAR
WARRANTY
FROM DATE OF
PURCHASE
FSP replacement parts for any top and lid rust.
LIMITED TEN-YEAR
WARRANTY
FSP replacement parts for outer tub should it crack, or fail to
contain water, due to defective materials or workmanship.
FROM DATE OF
PURCHASE
WHIRLPOOL WILL NOT PAY FOR
A. Service calls to:
1. Correct the installation of your washer.
2. Instruct you how to use your washer.
3. Replace house fuses or correct house wiring or plumbing.
B. Repairs when your washer is used in other than normal, single-family household use.
C. Pickup and delivery. Your washer is designed to be repaired in the home.
D. Damage to your washer caused by accident, misuse, fire, flood, acts of God, or use of
products not approved by Whirlpool.
E. Any labor costs during the limited warranties.
F. Repairs to parts or systems caused by unauthorized modifications made to the
appliance.
2-96
WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE-
QUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so this exclusion or limitation may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights which vary from state
to state.
Outside the United States, a different warranty may apply. For details, please contact
your authorized Whirlpool dealer.
If you need service, first see the “Troubleshooting” section of this book. After checking
“Troubleshooting,” additional help can be found by checking the “Requesting Assistance
or Service” section or by calling our Consumer Assistance Center telephone number,
1-800-253-1301, from anywhere in the U.S.A.
PART NO. 3363573
3/96
Printed in U.S.A.
© 1996 Whirlpool Corporation
® Registered Trademark/TM Trademark of Whirlpool, U.S.A.
|