G2P 61F/01
GB IE
PRODUCT DESCRIPTION SHEET
1. Control panel
2. Cooling fan (not visible)
3. Grill heating element
4. Rear oven lamp
5. Circular heating element (not visible)
6. Fan
7. Oven door*
*Important: An optional kit consisting of a glass
panel for the oven door with related assembly
components is available upon request from the After-
Sales Service. Using this kit reduces the oven door
external temperature; it is advisable for children's
safety.
Oven functions table
Description of function
Function
OVEN OFF
LAMP
0
-
Highest
level
• To switch on the oven light.
• Ideal for thawing frozen food at room temperature.
• The food should be placed in the oven in its wrapping to prevent it from drying
out.
First
level
DEFROST
FAN
• To cook (without preheating) foods that require the same cooking temperature
on one or more levels (e.g.: fish, vegetables, sweets), without transferring
odours from one foodstuff to the other.
Code no. 4819 310 39186.
• To cook meat (smoked bacon, steaks, sausages, etc.) and for making toast.
• Preheat the oven for 5 min. with the door closed.
• For best results, leave the oven door open when grilling.
• Arrange food on the wire shelf. When cooking meat, to avoid spatters of fat and
smoke, pour a little water into the drip tray.
GRILL
ACCESSORIES
• Turn the food during grilling.
Wire Shelf:
Grill pan set:
SWITCHING ON THE OVEN
• Turn the selector knob to the required function.
The oven light switches on.
• Turn the thermostat knob clockwise to the required temperature. The red thermostat indicator light
switches on; when the required cooking temperature is reached it will turn off.
At the end of cooking time:
CONTROL PANEL
• Turn the knob to “0”.
COOKING TIME PROGRAMMER
This programmer allows you to set a time of between 1 and 120 minutes.
To set cooking time, after selecting the required cooking function, turn the knob right
round in a clockwise direction and then turn it back in the opposite direction to the desired
cooking duration. When the set cooking time has elapsed, the oven switches off and the
programmer remains at “0”. To use the oven in manual mode, i.e. without setting a cooking
time, make sure that the programmer knob is set to
is set to “0” the oven will not switch on.
To switch on the oven, either set the programmer to
time.
. Important: When the programmer
or else set the required cooking
1. Function selector knob
2. Cooking Time knob
3. Thermostat knob
4. Thermostat indicator light (red)
5019 310 56274
|